Instructions

My goal is to help you create a beautiful, functional instrument right from your 3D printer.

This guide contains general printing advice, safety information, and troubleshooting tips that apply to all of my instrument designs. Please read it carefully for the best results.

The included .3mf file has all the required print settings pre-configured and works directly in Bambu Studio.

For all other slicers, please refer to the original product listing on my store for the detailed printing settings required for your model.

3D printing wind instruments is notoriously difficult, and your results may vary! The sound of a flute is created by precise geometry. Small imperfections can greatly affect the final tone and playability.

The soundhole and the internal windway (the narrow channel you blow into) are the most critical parts for sound production. Always ensure they are perfectly clean and smooth after printing.

Sometimes a freshly printed flute might need a little cleanup to play perfectly. This is not always required, but if you have issues, these steps will likely solve them.

Problem: My flute makes no sound, or only a weak, airy sound.

• The Cause: The most common reason is a small imperfection blocking the windway. Even a tiny piece of stray plastic can disrupt the airflow and prevent a clear tone.
• How to Check: Hold the mouthpiece up and look directly through the narrow windway channel against a bright light source.
• The Fix: If you see any stringing, debris, or roughness inside, you will need to clear it out. Use a small needle file, a folded piece of fine-grit sandpaper, or the edge of a thin craft knife.

• Material Choice: I recommend using only high-quality PLA or PETG from reputable manufacturers, as they are generally considered stable and safe for casual contact. Food-safe certifications differ per manufacturer and color.
• Cleaning: It is highly recommended to wash the mouthpiece with soapy water after playing - especially if you share it with others. Bacteria can build up between the layer lines.
• WARNING: Do NOT use hot water or a dishwasher. High heat will permanently warp the plastic.

My goal is for you to be happy with your purchase and successful with your print! If you've followed the guides and are still having trouble, please contact me!

I'd love to see your finished instruments! Please tag me on social media?